Sodium Perborate SDS GHS, MSDS Sheet of Manufacturers

Anmol Chemicals is the pioneer manufacturers of Sodium Perborate, Pharmaceutical Excipients Fragrance & Flavor chemicals in India. We offer Halal and Kosher Sodium Perborate made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Sodium Perborate is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Sodium Perborate SDS GHS, MSDS Sheet

Sodium Perborate Monohydrate SDS GHS, MSDS Sheet, Material safety Data Sheet

Product Mame: Sodium Perborate.
CAS No.: 10332-33-9 Monohydrate), 7632-04-4 or 11138-47-9 (Anhydrous)
EINECS: EC Number: 231-556-4 or 234-390-0 (Anhydrous, Monohydrate)
Molecular Weight: 81.82 Anhydrous, 99.81 Monohydrate
Chemical Formula: BNaO3 Anhydrous, BNaO3.H2O Monohydrate
Recommended usage: Industrial Manufacturing.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Oxidizing solids Category 3, (H272)
Reproductive toxicity Category 1B, (H360)
Acute toxicity, Oral Category 4, (H302)
Specific target organ toxicity - single exposure Category 3, (H335)
Serious eye damage Category 1, (H318)

Hazard statement(s):
H272 May intensify fire; oxidizer.
H302 Harmful if swallowed.
H318 Causes serious eye damage.
H331 Toxic if inhaled.
H335 May cause respiratory irritation.
H360 May damage fertility or the unborn child.

Precautionary statement(s):
P201 Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P220 Keep/Store away from clothing/ combustible materials.
P221: Take any precaution to avoid mixing with combustibles.
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P264: Wash … thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ eye protection/ face protection.
P330: Rinse mouth.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P370+378: In case of fire: Use Water spray, Foam for extinction.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P308+313: IF exposed or concerned: Get medical advice/attention.
P405: Store locked up.
P403+233: Store in a well ventilated place. Keep container tightly closed.
P501: Dispose of contents/container to an authorized agent only.
For the full text of the H-Statements and R-phrases, see Section 16.

Classification according to Directive 67/548/EEC or Directive 1999/45/EC:
T = Toxic
R61-23: May cause harm to the unborn child. Toxic by inhalation.
Xn = Harmful
R62-22: Possible risk of impaired fertility. Harmful if swallowed.
Xi = Irritant
R37-41 = Irritating to respiratory system. Risk of serious damage to eyes.
O = Oxidising
R8 = Contact with combustible material may cause fire.

Ingredient: Sodium Perborate Monohydrate
CAS No.: 10332-33-9 Monohydrate)
EINECS: EC Number: 231-556-4
Percent: 97 - 100%

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.

Flammability of the Product: Non-flammable but it is an oxidizer.
Auto-Ignition Temperature: Not applicable.
Products of Combustion: It emits toxic oxides of boron, sodium and fumes when heated to decomposition.
Fire: Sodium Perborate is supporting fire as an oxidizer.
Explosion: Contact with oxidizable substances may cause explosion.
Fire Extinguishing Media: Water spray, Foam. Use means suitable for extinguishing surrounding fire. Avoid carbon dioxide and gas filled extinguisher.
Special Information: Sodium Perborate is an oxidizer. In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures or when moistened under fire conditions, it may produce toxic or irritating fumes.

Small Spill: Eliminate all sources of ignition. Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Eliminate all sources of ignition. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow evacuating through the sanitary system if local laws permit.

Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at places where dust is formed. If you feel unwell, seek medical attention.
Keep Sodium Perborate in a tightly closed container, stored in a cool <32C, dry, ventilated area. Protect against physical damage heat or contact with combustible substances.

Airborne Exposure Limits: None established. Limit.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

Appearance: White crystals or powder.
Odor: None.
Solubility: Soluble in water.
pH: 10 at 1% solution at 25 C (77F)
Density: 2.4 - 2.6 gm/cc.
Molecular Weight: 99.81
Molecular Formula: BNaO3 • H2O
% Volatile by volume @ 21C (70F): 0
Boiling Point: Not available
Melting Point: Decomposes at 60C
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.

Stability: Sodium Perborate is stable under ordinary conditions of use and storage. It becomes unstable by heat and moisture.
Hazardous Decomposition Products: Oxygen, oxides of sodium, boron oxides and fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Organic substances, Strong reducing agents, Powdered metals, Strong bases, Alcohols, phosphorous, Anhydrides, Halogens, Acids Metal powders and Reducing agents. Heat.
Conditions to Avoid: Moisture, Heat, Incompatibles.

Routes of Entry: Inhalation, Ingestion, Contact.
Toxicity to Animals:
ORAL (LD50): 1908 mg/kg (Rat).
ORAL (LD50): 1060 mg/kg [Mouse].
Intravenous (LD50 ): 600 mg/kg (Cat)
Carcinogenic Effects: Not a reported carcinogen.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Chronic Effects on Humans: May cause damage to the following organs: lungs, blood, mucous membranes.
Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant), of ingestion, of inhalation.

BOD5 and COD: Not available.
Environmental Toxicity:
LC50/96h: 51 mg/l (Brachydanio rerio)
NOEC/48h: 8 mg/l (Daphnia magna)
NOEC/96h: 25 mg/l (Brachydanio rerio)
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.

DOT (USA)
Shipping Name: SODIUM PERBORATE MONOHYDRATE
Hazard Class: 5.1
UN Number: UN3377
Hazard Label: Oxidizer
Packing Group: III
IMDG
Shipping Name: SODIUM PERBORATE MONOHYDRATE
Hazard Class: 5.1
UN Number: UN3377
Hazard Label: Oxidizing Agent
Marine pollutant: No
Packing Group: III
IATA
Shipping Name: SODIUM PERBORATE MONOHYDRATE
Hazard Class: 5.1
UN Number: UN3377
Hazard Label: Oxidizer
Packing Group: III

USA:
OSHA Hazards: This product is considered a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
Section 313: No chemicals are reportable under Section 313.
SARA 311/312 Hazards: Fire Hazard, Immediate (Acute) Health Hazard.
TSCA:
CAS# 10332-33-9 is not listed on the TSCA Inventory.
CAS# 7632-04-4 is listed on the TSCA Inventory.
TSCA (40 CFR 710): Exempt: Hydrate of sodium peroxometaborate
CERCLA DESIGNATION & REPORTABLE QUANTITIES (RQ) (40 CFR 302.4): Not listed
Massachusetts Right To Know Components
No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components
Sodium peroxometaborate monohydrate
CAS-No.: 10332-33-9
New Jersey Right To Know Components
Sodium peroxometaborate monohydrate
CAS-No.: 10332-33-9
California Prop. 65 Components
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

Canada WHMIS: CLASS C: Oxidizing material. CLASS D-2B: Material causing other toxic effects (TOXIC).
CAS# 10332-33-9 is not listed on Canada's Ingredient Disclosure List.
CAS# 10332-33-9 is listed on Canada's DSL List
CAS# 7632-04-4 is listed on Canada's DSL List
CAS# 7632-04-4 is not listed on Canada's Ingredient Disclosure List.

EINECS: EC Number: 231-556-4
H272 = May intensify fire; oxidizer.
H302 = Harmful if swallowed.
H318 = Causes serious eye damage.
H331 = Toxic if inhaled.
H335 = May cause respiratory irritation.
H360 = May damage fertility or the unborn child.
T = Toxic
Xn = Harmful
Xi = Irritant
O = Oxidising
R37-41 = Irritating to respiratory system. Risk of serious damage to eyes.
R62-22 = Possible risk of impaired fertility. Harmful if swallowed.
R61-23 = May cause harm to the unborn child. Toxic by inhalation.
R8 = Contact with combustible material may cause fire.

Disclaimer:
********************************
Our company provides this Sodium Perborate Monohydrate MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This Sodium Perborate Monohydrate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
********************************

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, etc.